Charging
Loosen the screw
2. Remove top of robotino then remove the battery
3. Look at voltage and current (12V 9A) then adjust the charger
4.Connect alligator clip to battery and wait for 2-3 hours.
Last updated
Loosen the screw
2. Remove top of robotino then remove the battery
3. Look at voltage and current (12V 9A) then adjust the charger
4.Connect alligator clip to battery and wait for 2-3 hours.
Last updated
Assoc. Prof. Wiroon Sriborrirux, Founder of Advance Innovation Center (AIC) and Bangsaen Design House (BDH), Electrical Engineering Department, Faculty of Engineering, Burapha University
