# Motion Sensors GUI Integration via Serial Studio

## L*ab Objective:*

    In this lab, participants will integrate motion sensors with the Infineon PSoC 6 microcontroller. The microcontroller will gather real-time motion data from the sensors. This data will then be transmitted to Serial Studio, where it will be visualized and analyzed through an interactive graphical user interface (GUI). The aim is to provide participants with hands-on experience in sensor integration, data transmission, and GUI-based visualization, enhancing their understanding of motion sensor applications and data interpretation.

## 🔥 Requirements

<table><thead><tr><th width="429">Resources</th><th>Links</th></tr></thead><tbody><tr><td>Computer</td><td>💻</td></tr><tr><td>ModusToolbox™ software v3.0 or later</td><td><a href="https://www.infineon.com/modustoolbox">Link</a></td></tr><tr><td>CY8CKIT-062S2-43012 Infineon Board</td><td><a href="https://github.com/Advance-Innovation-Centre-AIC/BIIL_MTB-100_Hello_World_and_LED_Blinking_Programming_Template/assets/88732241/0215501d-b774-4045-8e64-ef49e28d8404">Link</a></td></tr><tr><td>Technical Report</td><td><a href="https://www.dropbox.com/scl/fi/amaxc94pte0ut2i1r5ewx/Technical-Report-Lab00.paper?rlkey=b3xm3vrerz9xgv1glb30cvy9z&#x26;dl=0">dropbox</a></td></tr></tbody></table>

## 🚩 Let start

### Create Application

<figure><img src="https://1856353139-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F-MClo3nC-1US0rbK8Qau%2Fuploads%2FK8v6R1KyN2UwbdFHImby%2Fimage.png?alt=media&#x26;token=42a139df-12fa-485a-8f56-3ca215ef1ea0" alt=""><figcaption><p>Create Application</p></figcaption></figure>

### Coding

* Config code for Serial Studio
  * Open sensor.c&#x20;
  * Add the below code into `cy_rslt_t sensor_get_data()` function.

{% code title="sensor.c" %}

```c
//For Serial Studio
printf("/*%d,%d,%d,%d,%d,%d,%f*/\r\n", raw_data.accel.x, raw_data.accel.y, \
 raw_data.accel.z, raw_data.gyro.x, raw_data.gyro.y, raw_data.gyro.z,heading);
```

{% endcode %}

<figure><img src="https://1856353139-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F-MClo3nC-1US0rbK8Qau%2Fuploads%2FGplSHBtqNLmMSigx8SmD%2Fimage.png?alt=media&#x26;token=02585764-5d18-49cc-b807-b5183fd6bf7c" alt=""><figcaption><p>Config code for Serial Studio</p></figcaption></figure>

* Save the file
* Build and Launch the Application

### Set up Serial studio for the board:&#x20;

* Open Serial Studio.&#x20;
* Navigate to the "Setup" section.&#x20;
* Locate the JSON file within your project's workspace and select it.&#x20;
* Select the appropriate port from the available options.&#x20;
* Click on "Connect" to establish a connection and start viewing the sensor data.

<figure><img src="https://1856353139-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F-MClo3nC-1US0rbK8Qau%2Fuploads%2FCnSD90KiI329JIPfDuY0%2Fimage.png?alt=media&#x26;token=6f9ea350-ca9c-4c1c-8ac6-69abf34a120d" alt=""><figcaption><p>Add file.json</p></figcaption></figure>

### Result&#x20;

<figure><img src="https://1856353139-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F-MClo3nC-1US0rbK8Qau%2Fuploads%2FKWYvIy1q0pcg26SIBeGQ%2Fimage.png?alt=media&#x26;token=acf13b30-f16a-4863-82b6-8213a8928204" alt=""><figcaption></figcaption></figure>

> #### 🎉 <mark style="color:blue;">Congratulations! You can now complete this lab</mark>

## Supported toolchains (make variable 'TOOLCHAIN')

* GNU Arm® embedded compiler v10.3.1 (`GCC_ARM`) - Default value of `TOOLCHAIN`
* Arm® compiler v6.16 (`ARM`)
* IAR C/C++ compiler v9.30.1 (`IAR`)

## Supported kits (make variable 'TARGET')

* [PSoC™ 62S2 Wi-Fi Bluetooth® pioneer kit](https://www.infineon.com/CY8CKIT-062S2-43012) (`CY8CKIT-062S2-43012`)
* [PSoC™ 62S1 Wi-Fi Bluetooth® pioneer kit](https://www.infineon.com/CYW9P62S1-43438EVB-01) (`CYW9P62S1-43438EVB-01`)
* [PSoC™ 62S1 Wi-Fi Bluetooth® pioneer kit](https://www.infineon.com/CYW9P62S1-43012EVB-01) (`CYW9P62S1-43012EVB-01`)
* [PSoC™ 62S3 Wi-Fi Bluetooth® prototyping kit](https://www.infineon.com/CY8CPROTO-062S3-4343W) (`CY8CPROTO-062S3-4343W`)

## Related resources

| Resources                       | Links                                                                                                                                                      |
| ------------------------------- | ---------------------------------------------------------------------------------------------------------------------------------------------------------- |
| ModusToolbox™ Software Training | [link](https://www.dropbox.com/sh/waj898o4o8eccx0/AAB3hBBaIQo2OvJ5-fubGJIha/training-modustoolbox-level1-getting-started-master/Manual/Ch2-Tools.pdf?dl=0) |

## Other resources

Infineon provides a wealth of data at [www.infineon.com](http://www.infineon.com) to help you select the right device, and quickly and effectively integrate it into your design.

## Document history

<table><thead><tr><th width="149">Version</th><th>Description of change</th></tr></thead><tbody><tr><td>1.0.0</td><td>LEVEL2-Lab207: Learn how to Read XENSIV-DPS-3XX Pressure Sensor and Displaying GUI on Serial Studio</td></tr></tbody></table>

## Authors:

* *Assoc. Prof. Wiroon Sriborrirux*
* *Mr. Sriengchhun Chheang*
* *Mr. Sabol Socare*<br>

<br>

***

© BDH Corporation, 2022-2023