LED Blinking and CAPSENSE via BDH Shell

Welcome to the BDH Shell over Serial Terminal

🔥 Requirements

ResourcesLinks

Computer

💻

ModusToolbox™ software v3.0 or later

CY8CKIT-062S2-43012 Infineon Board

Technical Report

🚩 Let start

Create Application

Coding

Build the Application

Launching the Application

Note: Before launching the program to the board, make sure that you have already connected the board to the computer through a USB cable.

set up USB cable

Result

🎉 Congratulations! You can now complete Lab105

Supported toolchains (make variable 'TOOLCHAIN')

  • GNU Arm® embedded compiler v10.3.1 (GCC_ARM) - Default value of TOOLCHAIN

  • Arm® compiler v6.16 (ARM)

  • IAR C/C++ compiler v9.30.1 (IAR)

Supported kits (make variable 'TARGET')

ResourcesLinks

ModusToolbox™ Software Training

Other resources

Infineon provides a wealth of data at www.infineon.com to help you select the right device, and quickly and effectively integrate it into your design.

Document history

Document title: BILL_MTB-107 – Read potentiometer sensor value via an ADC HAL

VersionDescription of change

1.0.0

BDH_Shell_over_Serial_Terminal

Authors:

  • Assoc. Prof. Wiroon Sriborrirux

  • Mr. Sriengchhun Chheang

  • Mr. Sabol Socare


© BDH Corporation, 2022-2023

Last updated

Assoc. Prof. Wiroon Sriborrirux, Founder of Advance Innovation Center (AIC) and Bangsaen Design House (BDH), Electrical Engineering Department, Faculty of Engineering, Burapha University