Advance Innovation Centre

AIC Knowledge @ EEC for All
😎Logical Thinking
MCU & Interfacing with Infineon PSOC™
IoT Development with Infineon PSOC™ & BDH Platform
🖥️Operation Systems
⌚Embedded Systems Development
🛠️C/C++ for Embedded Programming
🤖Artificial Intelligence (AI)
⚙️FPGA Design and Development
- Verilog HDL via Vivado IDE
- C/C++ Programming on Ultra96v2 FPGA Board
  - Application C/C++ on Ultra96v2 Part 1
    Design Overview
    Step 1 - Burn the image to SD card
    Step 2 - Bring up Ultra96v2
    Step 3 - Installing the Vitis-AI runtime packages
  - Application C/C++ on Ultra96v2 Part 2
    STEP 1 : Setting auto boot Wifi
    STEP 2 : How to working on Embedded
    STEP 3 : How to run the test code
🤖Robotics
🚩Special Topics
🤟Recommended by AIC

Powered by GitBook

On this page

Was this helpful?

🚩Special Topics

Node-Red

Get started with Node Red

Turn off node red

PreviousOpen node-red NextInstall Dashboard on Node-red

Last updated 4 years ago

Assoc. Prof. Wiroon Sriborrirux, Founder of Advance Innovation Center (AIC) and Bangsaen Design House (BDH), Electrical Engineering Department, Faculty of Engineering, Burapha University

node-red-stop

After you turn off node-red you will see "Lost connection to server, reconnecting......." as show in figure below: