Push/Pull Button to Turn ON/OFF LED via PDL

Lab Objective:

🔥 Requirements

Resources	Links
Computer	💻
ModusToolbox™ software v3.0 or later	Link
CY8CKIT-062S2-43012 Infineon Board	Link
Technical Report	dropbox

🚩 Let start

Create Application

• 👉 Open Eclipse IDE ModusToolbox

Create application

Enable Button and LED Pin

Enable Button Pin

Enable LED Pin

Coding

• Coding: Open the main.c file and add the following code to the main(void) function.

int main(void)
{
    cy_rslt_t result;

    /* Initialize the device and board peripherals */
    result = cybsp_init() ;
    if (result != CY_RSLT_SUCCESS)
    {
        CY_ASSERT(0);
    }
    /* Enable global interrupts */
    __enable_irq();

    // Embedded systems to redirect the standard input/output (I/O) functions like printf() and scanf()
    cy_retarget_io_init(CYBSP_DEBUG_UART_TX, CYBSP_DEBUG_UART_RX, CY_RETARGET_IO_BAUDRATE);
    printf("\x1b[2J\x1b[;H");

    for (;;)
    {
    	//Button is active low -> 0 is pressed and 1 is not pressed.
    	if(!Cy_GPIO_Read(CYBSP_USER_BTN_PORT, CYBSP_USER_BTN_NUM)){
    		Cy_GPIO_Clr(CYBSP_USER_LED1_PORT, CYBSP_USER_LED1_NUM); // Turn On LED
    		printf("Button Pressed --> LED ON \r\n");
    		Cy_SysLib_Delay(500U);
    	}
    	else{
    		Cy_GPIO_Set(CYBSP_USER_LED1_PORT, CYBSP_USER_LED1_NUM);
    		printf("Button not Pressed --> LED OFF \r\n"); // Turn Off LED
    		Cy_SysLib_Delay(500U);
    	}
    }
}

Build the Application

• 👉 Build the Application

Build Application

Launching the Application

• 👉 Launching the Application

  • Before launching the program to the board, make sure that you have already connected the board to the computer through a USB cable.

    

    set up USB cable
  • Launching Program

  

  Launching Program
• 👉 Check the Result

🎉 Congratulations! You can now complete Lab104

Supported toolchains (make variable 'TOOLCHAIN')

• GNU Arm® embedded compiler v10.3.1 (GCC_ARM) - Default value of TOOLCHAIN

• Arm® compiler v6.16 (ARM)

• IAR C/C++ compiler v9.30.1 (IAR)

Supported kits (make variable 'TARGET')

• PSoC™ 62S2 Wi-Fi Bluetooth® pioneer kit (CY8CKIT-062S2-43012)

• PSoC™ 62S1 Wi-Fi Bluetooth® pioneer kit (CYW9P62S1-43438EVB-01)

• PSoC™ 62S1 Wi-Fi Bluetooth® pioneer kit (CYW9P62S1-43012EVB-01)

• PSoC™ 62S3 Wi-Fi Bluetooth® prototyping kit (CY8CPROTO-062S3-4343W)

Related resources

Resources	Links
ModusToolbox™ Software Training	link

Other resources

Infineon provides a wealth of data at www.infineon.com to help you select the right device, and quickly and effectively integrate it into your design.

Document history

Document title: BILL_MTB-104 – GPIO-PDL Button with LED Template

Version	Description of change
1.0.0	Lab 104: Learn basic GPIO control with PSoC 6 using Push/Pull Button to Turn ON/OFF LED via PDL

Authors:

• Assoc. Prof. Wiroon Sriborrirux

• Mr. Sriengchhun Chheang

• Mr. Sabol Socare

---

© BDH Corporation, 2022-2023