Hello World and LED Blinking

Hello World and LED Blinking Programming

This lab will guide you through the process of using the PSOC Infineon board with the Eclipse IDE for ModusToolbox. You will learn how to create, build, and launch application programs. By the end of this lab, you will be able to independently perform these tasks.

🔥 Requirements

Resources	Links
Computer	💻
ModusToolbox™ software v3.0 or later	Link
CY8CKIT-062S2-43012 Infineon Board	Link
Technical Report	dropbox

🚩 Let start

• 👉 Open Eclipse IDE ModusToolbox

Modus Toolbox GUI

• 👉 Select Board

  
• 👉 Select Application

  
• 👉 Build Application

  
• 👉 Launching Program

  • Before launching the program to the board, make sure that you have already connected the board to the computer through USB cable.

    
  • Launching Program

    
• 👉 Serial Terminal Setup

  • Download and Install Putty

    Download link

    
  • After Install the Putty now let follow the below

    • Open Device Manager and check COM Port

      
    • Open Putty and Setup as below:

      • Select Serial

      • Serial line COM_

      • Speed 115200

      • Click Open

        
• 👉 Check the Result

  • You will see Hello World!!! on the serial terminal.

    
  • LED Blinking

    

    LED Blinking

🎉 Congratulations! You can now complete Lab100 by creating, building, and launching the application program.

---

Supported toolchains (make variable 'TOOLCHAIN')

• GNU Arm® embedded compiler v10.3.1 (GCC_ARM) - Default value of TOOLCHAIN

• Arm® compiler v6.16 (ARM)

• IAR C/C++ compiler v9.30.1 (IAR)

Supported kits (make variable 'TARGET')

• PSoC™ 62S2 Wi-Fi Bluetooth® pioneer kit (CY8CKIT-062S2-43012)

• PSoC™ 62S1 Wi-Fi Bluetooth® pioneer kit (CYW9P62S1-43438EVB-01)

• PSoC™ 62S1 Wi-Fi Bluetooth® pioneer kit (CYW9P62S1-43012EVB-01)

• PSoC™ 62S3 Wi-Fi Bluetooth® prototyping kit (CY8CPROTO-062S3-4343W)

---

© BDH Corporation, 2022-2023